Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 67
] to [8] on the printed-out chart using a, Measure the line length at each of points
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L ) Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates an example to measure points [1] and [5]. As illustrated in [5] [1] this example, measure the line length at each printed point. - The measurement value can be entered in units of up to 0.1 mm. - Write down the measured lengths so that you do not forget them. [5] [7] [1] [2] [6] [8] [3] [4] * Press each point number, then enter the measured length using the keypad, [,], or [+] on the screen. - To reset a value, press [Clear]. 5 5-17
5-17
bizhub PRO C1060L
5
bizhub PRESS C1070/C1070P/C1060/C71hc
H
Measure the line length at each of points
[1] to [8] on the printed-out chart using a
scale.
-
The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at each
printed point.
-
The measurement value can be entered in
units of up to 0.1 mm.
-
Write down the measured lengths so that you
do not forget them.
I
Press each point number, then enter the measured length using the keypad, [
,
], or
[
+
] on the screen.
-
To reset a value, press [Clear].
[1]
[5]
[7]
[6]
[8]
[2]
[3]
[4]
[1]
[5]