Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 80
Density Auto Adjustment RU] screen., automatically return to the [Maximum
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5.2 Image Quality Adjustment % Load the paper that has been used to register the target density into the tray. The paper profile of the tray is automatically switched to the paper profile that has been used to register the target density. & Select the tray containing paper, then press [OK]. ' Press Start on the control panel. A chart applied the Screen 1 (Dot190 Recommended) is Output, and auto adjustment is performed. When the adjustment is completed, you return to the [Maximum Density Auto Adjustment (RU)] screen. Adjustment processing cannot be stopped until all charts are printed out. ( When the adjustment is completed, you automatically return to the [Maximum Density Auto Adjustment (RU)] screen. Check the adjustment result. The auto adjustment result is displayed in [Current Data]. ) Press [Return] to return to the [Process Adjustment Menu] screen. Note that the tray remains set to the paper profile that has been used to register the target density. Tips If [Maximum Density Auto Adjustment (RU)] is carried out, the paper profile of the tray that has been used for auto adjustment is switched to the paper profile that has been used to register the target density , and it is not returned to the paper profile that has been used before adjustment. After the adjustment is completed, return to the original paper profile. After completing this adjustment, you can ask your service representative to configure a setting so that the paper profile automatically returns to that used before adjustment. For more information, contact your service representative. Then, carry out Color Density Manual Control (page 5-34). 5-30