Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 90
sequence from row A., Likewise, measure rows B to E.
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5.2 Image Quality Adjustment 0 Place the FD-5BT ruler on the chart, while aligning the protrusion of the FD5BT with the ruler guide. - To use the FD-5BT for measurement, remove it from the target mask. 1 Carry out the measurement in sequence from row A. - Hold down the side button of the FD-5BT. After a bleep sounds, slide the FD-5BT while holding down the side button. After sliding the FD-5BT to the opposite side, release the side button. - For details about how to use the FD-5BT, refer to the manual supplied with this machine. 2 Likewise, measure rows B to E. The measured parts are color-displayed on the screen in the same way as for the chart. 5-40
5-40
5.2
Image Quality Adjustment
O
Place the FD-5BT ruler on the chart,
while aligning the protrusion of the
FD-
5BT
with the ruler guide.
-
To use the
FD-5BT
for measurement,
remove it from the target mask.
P
Carry out the measurement in
sequence from row A.
-
Hold down the side button of the
FD-5BT
.
After a bleep sounds, slide the
FD-5BT
while holding down the side button.
After sliding the
FD-5BT
to the opposite
side, release the side button.
-
For details about how to use the
FD-5BT
,
refer to the manual supplied with this
machine.
Q
Likewise, measure rows B to E.
The measured parts are color-displayed on the
screen in the same way as for the chart.