Kyocera FS-1028MFP FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 3
Preparations, Clearance, Environment, Unpacking
View all Kyocera FS-1028MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1 Preparations Clearance 500 mm (19-11/16") Environment 300 mm (11-13/16") 300 mm (11-13/16") 300 mm (11-13/16") 1000 mm (39-3/8") • Temperature: 10 to 32.5 °C (50 to 90.5 °F) • Humidity: 15 to 80 %RH • Power Supply: 120 V AC, 60 Hz / 220 to 240 V AC, 50/60 Hz CAUTION: Be sure to provide enough space around machine. Prolonged use without sufficient clearance may cause overheating. Unpacking 1 Unpack the machine and all its included components. If the machine is FS-1128MFP, the modular cord with the attached ferrite core is enclosed. IMPORTANT: Place the machine in a stable position. When carrying the printer, always hold the right and left sides as shown. 2 Remove the packing tape and the protective sheet. SETUP GUIDE 3
SETUP GUIDE
3
1
Preparations
Clearance
Environment
•
Temperature: 10 to 32.5 °C (50 to 90.5 °F)
•
Humidity: 15 to 80 %RH
•
Power Supply: 120 V AC, 60 Hz / 220 to 240 V AC, 50/60 Hz
CAUTION:
Be sure to provide enough space around machine. Prolonged use
without sufficient clearance may cause overheating.
Unpacking
1
Unpack the machine and all its included
components.
If the machine is FS-1128MFP, the modular
cord with the attached ferrite core is
enclosed.
IMPORTANT:
Place the machine in a
stable position. When carrying the printer,
always hold the right and left sides as
shown.
2
Remove the packing tape and the protective sheet.
300 mm
(11-13/16")
1000 mm
(39-3/8")
500 mm
(19-11/16")
300 mm
(11-13/16")
300 mm
(11-13/16")