Kyocera TASKalfa 2420w TASKalfa 2420w AutoCAD Driver Operation Guide - Page 21

AutoCAD® Driver Raster Photo Mode This button is used to print the shading effects of a raster image. Some raster images are meant to be 100% solid (no tones such as a line). Others are pictures or drawings where shades are required. Select Photo Mode to print the raster image as shades rather than 100% solid. Embedded Excel or Word documents should have this un-selected for optimum output. Adjustments - Monochrome Systems Line Width Compensation Controls line weights on a global basis. Values can be from -4.0 to +4.0. A higher value will result in all lines increasing in thickness. A lower value will result in all lines decreasing in thickness. Vector Line Dither Controls dithering patterns for grayscale line entities. Values are from Fine (Tight) to Coarse (Wide) dither patterns. NOTE This does not control vector fill areas. This should be set at the IPS RTL Image Dither Works in conjunction with Raster Image Control: if Raster Photo Mode is enabled, then RTL Image dither can be controlled. Values are from Fine (tight) to coarse (wide) dither patterns. Photographic images work best with a more coarse setting while embedded text documents from Word or Excel work best with a Fine setting. This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from. ” 2011. - 21 -