Kyocera TASKalfa 2420w TASKalfa 2420w AutoCAD Driver Operation Guide - Page 8
the IP connection, Output Port Selection: select
View all Kyocera TASKalfa 2420w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
AutoCAD® Driver 7. Output Port Selection: select the IP connection, which is created at the time the Windows driver is installed. NOTE The TCP/IP windows port should be installed prior to the AutoCAD driver to use this port. If the user chooses not to use this method, select Plot to File. 8. Specify the printer's name. Since all of the printers use the same driver, the user could set up a name for each device. We recommend you use the nomenclature of your machine to identify the printer's name. Example: 4820/9148/8148 9. To complete the installation, click the Finish button. Printer configuration will be done later and there is no need to "Calibrate Plotter" as the printer was calibrated during installation by the technician. 10. Once the installation is complete, please note the creation of the 5000.pc3 file in the ACAD/Plotters folder. This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from. 2011. - 8 -