Kyocera TASKalfa 2420w TASKalfa 2420w AutoCAD Driver Operation Guide - Page 22

AutoCAD® Driver Appendix Accounting Features - Variables Specialized names or masks can be used for the accounting data fields in the Custom Properties of the AutoCAD Driver (Requester, Job Number, and Description) Both the Requester and Job Number fields by default are recorded into the Controller Accounting log. The Job Number field can then be the key field used to query Production Reports directly from the Unattend software. The Controller log can also be imported into any program that can read ASCII data. Specialized Mask Names and Rules These customized names can be assigned to the mask elements using all normal methods. Dwgname and dwgpath are the only two variables that can be set. Example: AutoCAD reports original file path of drawing named "R300-20.DWG" and the path that the file is stored in as: C:\Program Files\AutoCAD 2006\drawings\R300-20.DWG If mask item is set to: Dwgname logged is "R300-20" Dwgpath logged is 'C:\Program Files\AutoCAD 2006\drawings\R300-20.DWG" dwgpath=x\x\x\x\x where = sign and following is optional mask to select path elements. x replaced by # includes that element of path to be used in accounting data. dwgpath=x\#\x\x logged is 'Program Files' dwgpath=x\#\# logged is "Program Files\AutoCAD 2006" This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from. ” 2011. - 22 -