Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Printer Driver User Guide Rev 1 - Page 60
Trapping, Fonts, Font Settings
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Imaging Trapping Fonts 1 In the Imaging tab, in the Print Quality list, select Custom. 2 Click EcoPrint to open the EcoPrint dialog box. 3 To start EcoPrint, select On; to stop it, select Off. 4 Click OK to close the EcoPrint dialog box. In color printing, color inks or toners are applied separately to a page. A color image has its component colors applied in color separations of cyan, magenta, yellow and black. These color separations must be aligned (registered) precisely to produce a quality full color image. During printing, the paper or media type may shift slightly. While the shift might be very small, the gaps between the colors in the image can be noticeable. Color trapping corrects it by overlapping colors slightly so that minor alignment issues are corrected. To use trapping in a document, select a value for the print overlap pixel width: Light, 0.5 pixel trapping; Medium, 1 pixel trapping; Heavy, 1.5 pixels trapping; Very Heavy, 2 pixels trapping. Note: Trapping is not available when PCL 5c or PDF is selected in the PDL Settings dialog box. A computer font is a data file containing a set of glyphs (visual representations of textual elements), characters, or symbols. Common terms for fonts are: Bitmap fonts define each character as a pattern of pixels (the smallest resolvable rectangular areas of an image). Such fonts are not easily scalable and distort when reduced or enlarged. Outline fonts, in contrast to bitmap fonts, are defined as a set of mathematical lines and curves. An outline font is more easily scalable (designed to display and print clearly at any point size) than a bitmap font. Native fonts are the basic or original fonts installed with the computer operating system. TrueType fonts are the native fonts used by Microsoft Windows. TrueType fonts are a type of scalable outline fonts. TrueType has long been the most common format for fonts on Microsoft Windows. System fonts are the primary fonts used by the operating system. They are typically accessed through an application interface or through a common font dialog box. Device fonts are stored either permanently or temporarily in the printing system memory. Font Settings The Font Settings dialog box lets you specify how TrueType fonts are sent to the printing system. The chosen method affects the speed and quality of the print job: Download as outlines 7-2 User Guide