Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Printer Driver User Guide Rev 1 - Page 68

Imaging 5 Select HSL (hue, saturation and lightness) or RGB (red, green, blue) to work with as the color space. 6 Click the arrow buttons beneath the photograph to select one of three different images. Different colors are emphasized in each of the photographs to aid in the color adjustment process. Adjusting HSL (Hue, Saturation, Lightness) HSL controls adjust the full spectrum, brightness, contrast, and vividness of the color. 1 Under Select color space, select HSL (hue, saturation and lightness). 2 Adjust the distribution and balance of hues. For coordinated hue adjustment, from the Modify list select Master. Drag the Hue slider to the right or left to increase or decrease the value between -180 and +180. For specific hue adjustment, from the Modify list select Red, Yellow, Green, Cyan, Blue, or Magenta. Drag the Hue slider to the right or left to increase or decrease the value between -10 and +10. The upper color bar indicates the adjustment made when the slider is dragged, or a value is typed in the box. The horizontal brackets around the upper color bar show the range of the color bar affected by the adjustment. The lower color bar provides a reference point to the color bar above it for Hue Adjustment. 3 Drag each slider to adjust the Saturation, Lightness and Contrast between -10 and +10. You can also type values in the boxes. 4 If you want to return all HSL settings to zero, click Reset. 5 Click OK to save the new HSL settings. Adjusting RGB (Red, Green, Blue) RGB adjusts only the relative values of the colors red, green, and blue. 1 Under Select color space, select RGB. 2 Under each bar, drag the slider to adjust the relative values of Red, Green, and Blue between -10 and +10. You can also type values in the boxes. 3 If you want to return all RGB settings to zero, click Reset. 4 Click OK to save the new RGB settings. 7-10 User Guide