LG 26LC7DC Owners Manual - Page 87

10. Tint (Command: k j) 16. Balance (Command: k t) To adjust the screen tint. You can also adjust tint in the Video menu. Transmission [k] D][] [set ID][] [Data] [Cr] by Hexadecimal code) To adjust balance. You can also adjust balance in the Audio Transmission [k] [t][ menu. ] [set ID] [ ] [Data] [Cr] by Hexadecimal code) p.85. [Data] [x] Data Red : 0 - Green : 64 (*transmit *Refer to 'Real data mapping'. _ Acknowledgement [j ] [ ] [Set ID] [] Data Min : 0 - Max : 64 (*transmit *Refer to 'Real data mapping'. _ p.85. [OK/NG] [Data] [x] Acknowledgement [t][] [Set ID] [ ] [OK/NG] 1 1. Sharpness (Command: k k) 17. Color Temperature (Command: k u) To adjust the screen sharpness. You can also adjust sharpness in the Video menu. Transmission [k] [k][] [Set ID] [ ] [Data] [Cr] by Hexadecimal code) p.85. [OK/NG] [Data] [x] To adjust color temperature. You can also adjust color temperature menu. Transmission [k] [u][] [set ID][] [Data] [Cr] 3: User [Data] [x] in the Video Data Min : 0 - Max : 64 (*transmit *Refer to 'Real data mapping'. _ Acknowledgement [k][] [Set ID][] Data 0: Medium 1: Cool 2: Warm Acknowledgement [u][] [Set ID][] [OK/NG] 12. OSD Select (Command: k I) 18. Channel Tuning (Command: m a) number. To select OSD (On Screen Display) on/off. Transmission [k] [I] [] Data O: OSD off Acknowledgement [I] [] [Set ID] [ ] [Data] [Cr] Data 1 : OSD on [set ID] [] [OKiNG] [Data] [x] To tune channel to following physical/major/minor Transmission [m] [a][] [set ID][] [Data0] [ ] [Data!] [ ] [Data2] [ ] [Data3] [ ] [Data4] [] [Data5] [Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel 1 3. Remote Control Lock Mode (Command: k m) number, the Major is the number that the channel should be mapped to, and the Minor the ATSC tuner automatically is the sub-channel. Since To lock the remote control and the front panel controls on the set. Transmission [k] [m] [] Data O: Lock off Acknowledgement [m][] If you're Z X controls on/off, [Set ID] [ ] [Data] [Cr] Data 1 : Lock on [Set ID][] [OK/NG] [Data] [x] maps the channel to the when Major number, the Physical number is not required sending a command. Data 0: Physical Channel Number NTSC air: 02-45, ATSC air: 01-45, NTSC cable: 01,0E-7D ATSC cable: 01-87 not using the remote control and front panel on the TV, use this mode. When main power is remote control lock is released. Data1 & 2: Major Channel Number Data1: High byte Data2: Low byte Two bytes are available for the Major and Minor, nor14.Treble (Command: k r) mally only the second byte is used. Data3 & 4: Minor Channel Number Not needed for NTSC. To adjust treble. You can also adjust treble in the Audio menu. Transmission [k] [r] [] [Set ID][] [Data] [Cr] by Hexadecimal code) p.85. [OK/NG] [Data] [x] Data Min : 0 - Max : 64 (*transmit *Refer to 'Real data mapping'. _ Acknowledgement [r] [] [Set ID] [] 15 .Bass (Command: ks) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][SetlD][ ][Data][Cr] by Hexadecimal code) p.85. [OK/NG] [Data] [x] Data Min : 0 - Max : 64 (*transmit *Refer to 'Real data mapping'. _ Acknowledgement [s] [] [Set ID] [] 86