LG 26LH1DC5 Owner's Manual - Page 58

COMMERCIAL MODE INSTALLER MENU - Installer Menu Items 035 through 117 Menu Item 035 038 039 040 046 047 053 069 070 071 073 Function Value Range COMPPORT EN. 0 / 1 YPrPb EN. 0 / 1 REAR AUX EN 0 / 1 AUTO CAMPORT 0 / 1 STRT AUX SRCE 1 ~ 7, 255 AUX STATUS 0 / 1 DIS. CH-TIME 0 / 1 EN. CH-T COL. 0 / 1 FOR. CH-TIME 0~7 BCK. CH-TIME 0~7 CH NOT AVBLE 0 / 1 075 REVERT CH 0 / 1 078 UPN MSB 0 ~ 255 079 UPN MSB-1 0 ~ 255 080 UPN MSB-2 0 ~ 255 081 UPN LSB 0 ~ 255 082 CHKSM ERROR 0 / 1 083 HANDSHK TIME 0 ~ 5 084 PERMANENT BLK 0 / 1 087 REAR RGB EN. 0 / 1 088 EN NOISE MUTE 0 / 1 090 KEY LOCK 0 / 1 091 YPrPb2 EN. 0 / 1 092 RGB2 ENABLE 0~2 093 RJP AVAILABLE 0 / 1 094 SAP MENU EN 0 / 1 096 DEF. ASP. RATIO 0, 1, 2, 4, 5 102 ATSC BAND 0~4 103 ATSC TUNE MODE 0 / 1 104 START MINOR CH 0 ~ 255 106 ASP RATIO LOCK 0 / 1 107 BANNER SELECT N/A 116 VIDEO MUTE EN 0 / 1 117 FACT DEFAULT 0 / 1 Default Value Brief Description of Function and Comments 1 Set to 1 to enable HDMI. Set to 0 to disable. 1 Set to 1 to enable display panel Component 1 input jacks. 1 Set to 1 to enable display panel Video 1 input jack. 1 Set to 1 to automatically switch to Camport. 255 Sets the starting AUX source. 0 Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0. 0 Set to 1 to disable Channel-Time display. 1 Set to 1 to enable custom color for the Channel-Time display. 2 Chooses custom foreground color for the Channel-Time display. 2 Chooses custom background color for the Channel-Time display. 0 If set to 1 and channel override is 0, "NOT AVAILABLE" message is displayed when directly accessing a channel not in the favorite channel list. 0 If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel. 0 User programmable number, most significant byte. 0 User programmable number, most significant byte - 1. 0 User programmable number, most significant byte - 2. 0 User programmable number, least significant byte. 1 Enforces rigid M.P.I. checksum. 5 Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems. 0 Removes block hours setting for Parental Control and makes block permanent. 1 Enables RGB1 input. Set to 1 to enable, set to 0 to disable. 1 If set to 1, mutes audio if no signal is present. 0 If set to 1, keyboard is locked out, IR is still functional. 1 Set to 1 to enable Component 2 input jacks. 2 Enables Video 3 input. Set to 1 for Composite Video or 2 for S-Video. Set to 0 to disable. 0 Set to 1 to enable. 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu. 2 Sets default aspect ratio at power up. See detailed descriptions and item 106. 4 Selects ATSC band. 1 Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels. 0 Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number. 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. N/A Not applicable. 0 Set to 0 for normal, set to 1 for Blank. 0 0=Normal. 1=Loads factory default presets of all above settings. COMMERCIAL MODE 58