LG 26LH1DC5 Owner's Manual - Page 70
Remote Control, Picture Reception, Broadcast Tuning Mode Digital Channel OSD, Erratic Operation
View all LG 26LH1DC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
APPENDIX APPENDIX Erratic Operation Installer menu setup. Wrong Installer menu settings. Software problem. 8 Adjust Installer menu settings as required. 8 Remove TV power cord for 15 seconds. Remote Control Remote doesn't work. Remote not in TV mode. 8 Use Mode key to select TV; puts remote into 26LH1DC3/4/5 mode. Not aimed at IR remote sensor. Remote too far from IR sensor. 8 Point remote at TV's IR receiver on TV. 8 Move remote closer to TV's IR receiver or darken room. IR path to TV's receiver obstructed. 8 Remove obstructions. Weak batteries. 8 Replace batteries. Wrong battery polarity. 8 Check that "+" and "-" match in battery compartment. Too much light in room. 8 Dim room light. Wrong Installer remote control. 8 Requires compatible Installer remote, contact your LG dealer. Incorrect Bed 1-2 setting. 8 Set correct Bed 1-2 setting. Picture Reception Normal picture, poor or no sound. Audio muted. 8 Press MUTE or use Volume Up key to increase sound level. Broadcast problem. 8 Try a different channel. TV Speakers Off. 8 Turn TV speakers on. Broadcast Tuning Mode Digital Channel OSD No Information available display. Item 103 set to 1 physical 8 Set Item 103 to 0 for information to be added to virtual channel tuning digital OSD. channels tuning. *Note: For other problems not caused by the 26LH1DC3/4/5, refer to other devices' operating guide. 70