LG 26LH1DC5 Owner's Manual - Page 67

PEFERENCE 26LH1DC3/4/5 Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when: 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1). Selectable= Can be accessed with TV/AV key, direct access, etc. Auto Sense= Switches to this input when connector is inserted. The camport (Front Video) has the highest priority and will override any commands including tuning to the Start Channel. CAMPORT (Front Video) Functionality Control Item 34 CAMPORT EN 0 0 1 1 Item 40 AUTO CAMPORT 0 1 0 1 Front Video Operation Disabled Disabled Selectable Auto Sense CAMPORT Operation (Stand-Alone) When Camport Auto Sense is enabled as above, the TV's source will switch to the front video whenever a plug is inserted into any of the front panel video inputs (either composite Video or S-Video). When the plug is removed, the TV will switch back to the Previous channel or input source that the TV was using before the Plug was inserted. However, if any direct access to an RF channel or Aux channel is requested while the camport is active, then, when the camport plug is removed, the TV will switch to the last requested channel. Source changes using any Source Keys (TV/AV) are ignored. Channel Up/Channel Down and Flashback Commands are not direct access tuning commands and they are also ignored. Previous State Before Inserting CAMPORT Aux or RF Channel Aux or RF Channel Aux or RF Channel Operation State While CAMPORT Is Active None Direct Access Ch Up/Down, Flashback and TV/AV Keys State Upon Removal Of CAMPORT Previous Aux or RF Channel Last Requested RF or Aux Channel Previous Aux or RF Channel COMMERCIAL MODE CAMPORT Operation (PPV) The operation will be similar to that of the Stand-Alone mode. However, the PPV providers may send different commands to the TV for the same user commands. For instance, some providers will always send a direct tune command when it receives a channel up/down or a flashback command while other PPV providers will just send a key command. Previous State Before Inserting CAMPORT Aux or RF Channel Aux or RF Channel Aux or RF Channel Operation While CAMPORT Is Active None Direct Access Ch Up/Down, Flashback and TV/AV Keys State Upon Removal Of CAMPORT Previous Aux or RF Channel Last Requested RF or Aux Channel Last Requested Channel if PPV translates it to direct access tuning command. Otherwise, goes to Previous Aux or RF Channel 67