LG 32LT340C INSTALLATION - Page 5

Power On Status, Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100), Start Volume, Maximum Volume

Get LG 32LT340C PDF manuals and user guides View all LG 32LT340C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

ENGLISH 5 Power On Status ••Decide to select working status of TV Set when turn on main power. ••You can set with PWR, STD, LST. ••PWR always make TV set On status when turn on main power . ••STD make Stand-by status when turn on main power. ••LST make TVSet work like previous power status. As same concept as Power Backup mode; If main power were turned off in Power On status, TVSet would work in On status. If main power were turned off in Standby status, TVSet would work in Stand-by status. Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100) ••Decide to apply volume policy of Start Volume, Maximum Volume and Minimum Volume as On (Work) or Off (Do Not Work). Start Volume This entry sets the start volume level when is power on. ••The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max) ••The default setting is Off (disabled). ••When enabled, if the value is lower then the minimum specified in the minimum volume entry, the minimum volume entry must be used. ••When enabled, if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used. ••Access to a volume in Timer Power On of User Menu must be fixed to start volume when HTNG HotelMode (Enable) and Start Volume (Off, 0 ~ 100) were set simultaneously. Maximum Volume This entry sets the Maximum Volume level the set. ••The level is specified as a number between Minimum Volume to 100. (Min ≤ Max ≤ 100) ••If the command volume up to higher than maximum volume is received, that should be ignored. ••The default value is 100. Minimum Volume This entry sets the Minimum Volume level the set will produce. ••The level is specified as a number between 0 to Maximum Volume. (0 ≤ Min ≤ Max) ••If the command volume down to lower than minimum volume is received, that should be ignored. ••The default value is 0.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Power On Status
•
Decide to select working status of TV Set when turn on main power.
•
You can set with
PWR
,
STD
,
LST
.
•
PWR
always make TV set On status when turn on main power .
•
STD
make Stand-by status when turn on main power.
•
LST
make TVSet work like previous power status. As same concept as Power Backup mode; If main power
were turned off in
Power On status
, TVSet would work in On status. If main power were turned off in Stand-
by status, TVSet would work in Stand-by status.
Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100)
•
Decide to apply volume policy of
Start Volume
,
Maximum Volume
and
Minimum Volume
as
On
(Work) or
Off
(Do Not Work).
Start Volume
This entry sets the start volume level when is power on.
•
The level is specified as a number between minimum volume to maximum value.
(Min ≤ Start ≤ Max)
•
The default setting is
Off
(disabled).
•
When enabled, if the value is lower then the minimum specified in the minimum volume entry,
the minimum volume entry must be used.
•
When enabled, if the value is larger then the maximum specified in the maximum volume entry,
the maximum volume value must be used.
•
Access to a volume in
Timer Power On
of User Menu must be fixed to start volume when
HTNG
HotelMode
(
Enable
) and
Start Volume
(
Off,
0
~
100
) were set simultaneously.
Maximum Volume
This entry sets the
Maximum Volume
level the set.
•
The level is specified as a number between
Minimum Volume
to
100
. (Min ≤ Max ≤ 100)
•
If the command volume up to higher than maximum volume is received, that should be ignored.
•
The default value is
100
.
Minimum Volume
This entry sets the
Minimum Volume
level the set will produce.
•
The level is specified as a number between
0
to
Maximum Volume
. (0 ≤ Min ≤ Max)
•
If the command volume down to lower than minimum volume is received, that should be
ignored.
•
The default value is
0
.
5
ENGLISH