LG 37LC2R Owners Manual - Page 29
We recommend using 1360*768, 60Hz 32LC2R, 37LC2R, 42LC2R, 32LB1R, 37LB1R, 42LB1R, for the PC mode, - vesa
View all LG 37LC2R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
! NOTE G To enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC/DTV) or HDMI IN port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G In 42PC1R*, 50PC1R*, 50PC3R* models, we recommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality. GWe recommend using 1360*768, 60Hz (32LC2R*, 37LC2R*, 42LC2R*,32LB1R*, 37LB1R*. 42LB1R*) for the PC mode, they provide the best picture quality. G If the resolution of PC is over UXGA, there will be no picture on the set. G Connect the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN port on the set. G Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally. G If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB (PC/DTV) or HDMI IN to display the PC on the set. G If graphic card on the PC does output analog and digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on video card if you use a HDMI to DVI cable. G When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality. CONNECTIONS & SETUP 27