LG 37LC2R Owners Manual - Page 80
Programming The Remote
View all LG 37LC2R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the remote control, while pointing at the component. Test the POWER and PR +/- buttons to see if the component responds properly. If not, the remote requires programming to operate the device. 2 Turn on the component to be programmed, then press the corresponding mode button (such as a D V D or V C R) on the remote control. The remote control button of desired device is lighted. 3 Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code. 4 Enter a code number using the NUMBER buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5 Press the MENU button to store the code. 6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2. 78 APPENDIX