LG 37LC2R Owners Manual - Page 76
Channel Select Command Command1m, Command2:a
View all LG 37LC2R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
APPENDIX 20. Abnormal State (Command2:z) To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF: Read Acknowledgement [z][ ][Set ID][ ][OK][Data][x] Data 0: Normal (Power on and signal exist) Data 1: No signal (Power on) Data 2: Turn the TV off by remote control Data 3: Turn the TV off by sleep time function Data 4: Turn the TV off by RS-232C function Data 5: 5V down Data 6: AC down Data 7: Turn the TV off by Fan Alarm function (option) Data 8: Turn the TV off by Off time function Data 9: Turn the TV off by Auto sleep function Data a: Turn the TV off by AV board detect * This function is "read only". 21. ISM Method (Command1:j, Command2:p) To control the ISM method. You can also adjust ISM Method in SPECIAL menu. This feature is not available for all models. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal Mode Data2: Orbiter Data 1: White Wash Data3: Inversion Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 22. Low Power (Command1:j, Command2:q) To reduce the power consumption of the monitor. You can also adjust Low Power in SPECIAL menu. This feature is not available for all models. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 0: Off Data 1: On Acknowledgement [q][ ][Set ID][ ][OK][Data][x] 23. Orbiter Time Setting (Command1:j, Command2:r) To adjust orbiter operation time term. This feature is not available for all models. Transmission [j][r][ ][Set ID][ ][Data][ ][Cr] Data Min: 1 ~ Max: FE Refer to 'Real data mapping 1'. See page 74 Acknowledgement [r][ ][Set ID][ ][OK][Data][x] APPENDIX 24 . Orbiter Pixel Setting (Command1:j, Command2:s) To adjust pixel number in orbiter function. This feature is not available for all models. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 3 Refer to 'Real data mapping 1'. See page 74 Acknowledgement [s][ ][Set ID][ ][OK][Data][x] 74 25 . Auto Configure (Command1:j, Command2:u) To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 26 . Channel Select Command (Command1m, Command2:a) To select a programme for the main picture. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1] [ ][Data2][Cr] Data 0: Min: 0 ~ Max: 63 Refer to 'Real data mapping 1'. See page 74 Data 1: Don't care Data 2: 0 : Main 1 : Sub Acknowledgement [a][ ][Set ID][ ][OK][Data0][x] * Real data mapping 1 0 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 C7 : Step 199 FE : Step 254 FF : Step 255 * Real data mapping 2 0 : -40 1 : -39 2 : -38 28 : 0 4E : +38 4F : +39 50 : +40