LG WM3885HCCA Owner's Manual - Page 24

HOW TO USE SPECIAL FUNCTION BUTTONS Your Steam Washer™ features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds. To Add Cycle Options to a Cycle: 1 Turn on the washer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. The cycle option buttons will light when selected. 4 Press the START/PAUSE button to start the cycle. The washer will start automatically. NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details. STEAM Use the STEAM button to add steam to the cycle for extra cleaning power and improved efficiency. See Steam Cycles section for additional details. NOTE: The steam option cannot be used with all cycles. DELAY WASH Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle. Each press of the button increases the delay time by one hour, up to 19 hours. STAIN CARE Use this option for heavily soiled loads that need improved stain treatment. When STAIN CARE is selected, the water temperature for the selected cycle will begin as warm water to help prevent the setting of certain types of stains. Then as the cycle progresses, the water will be heated to higher temperatures to help remove stains that require treatment at higher temperatures. This option is designed for optimum stain removal. NOTE: If STAIN CARE is selected with the SANITARY cycle, the cycle will begin with very hot water since that is default for that cycle and cannot be changed. 24 CUSTOM PGM Use the CUSTOM PGM button to select the course that you saved by using PGM SAVE. COLDWASHTM Use this function to save energy by using cold water while ensuring proper washing. For high wash efficiency, it is recommended to use less than 8 pounds. FRESH CARE Use this function when you are not able to unload your clothes, soon after the wash cycle ends. This function provides periodic tumbling for up to about 8 hours to prevent wrinkle. If you press the START/PAUSE or ON/ OFF button, you can unload your laundry at anytime. EXTRA RINSE This option will add an extra rinse cycle to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics. ADD GARMENTS The add garments function will be able to add garments during the cycle. When the display show Add Garments, press START/PAUSE button and add the garments. NOTE: This function CANNOT be used when tub temperature or water level is high and during the spin.