LG WM3885HCCA Owner's Manual - Page 25

HOW TO USE ENGLISH CUSTOM PROGRAM If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. To Save a Custom Program: 1 Turn on the washer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. Set any other desired options. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds. NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program. To Recall a Custom Program: 1 Turn on the washer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle. SECONDARY FUNCTIONS The special function buttons also activate secondary functions, including CHILD LOCK, DRUM LIGHT, WASH/RINSE OPTIMIZER™, and LANGUAGE. Press and hold the button marked with the secondary function for 3 seconds to activate. CHILD LOCK Use this option to prevent unwanted use of the washer or to keep cycle settings from being changed while the washer is operating. Press and hold the STAIN CARE button for 3 seconds to activate or deactivate the child lock function. The child lock indicator will be shown in the display, and all buttons are disabled except the ON/OFF button. NOTE: CHILD LOCK lasts after the end of cycle. If you want to deactivate this function, Press and hold the STAIN CARE button for 3 seconds. DRUM LIGHT The drum is equipped with a blue LED light that illuminates when the washer is turned on. This light automatically turns off when the door is closed and the cycle starts. To turn on the light during a cycle, press and hold the DELAY WASH button for 3 seconds. The drum light will illuminate and then turn off automatically after 4 minutes. WASH/RINSE OPTIMIZERTM This function can adjust washing & rinsing time efficiently by checking the level of detergent and degree of hardness. Press and hold the EXTRA RINSE button for 3 seconds to activate or deactivate WASH/RINSE OPTIMIZER™. 1 Excessive detergent amount: rinsing cycle is increased. 2 Insufficient detergent amount: washing time is increased. 3 A small amount of remaining detergent detected, additional rinsing will be added. LANGUAGE turned off. This option allows you to change the language shown in the display. Once set, the selected language will stay set even after the power is The display language options are English, French, and Spanish; English is the default language. To change the language: 1 Press the ON/OFF button to turn on the washer. 2 Press and hold the OPTION button for 3 seconds, until the following screen appears in the display. LANGUAGE IF YOU WANT TO SELECT A LANGUAGE, PUSH A RIGHT BUTTON ESPAÑOL FRANÇAIS ENGLISH EXIT 3 When OPTION is pushed, English is displayed as the default language.Press the FRESH CARE button to select FRANÇAIS (French) or COLDWASHTM for ESPAÑOL (Spanish). 25