Lenovo NetVista X40 Quick Reference for NetVista 2179 and 6643 systems (Dutch) - Page 64
Installing an adapter, Start Options, Startup Sequence, Second device, Attention
View all Lenovo NetVista X40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
v PCI expansion slots 1 through 5 are on PCI bus 0 . The system scans the AGP slot and PCI slots 1 through 5 to assign system resources; then, the system starts (boots) the PCI devices in the following order, if you have not changed the default boot sequence : PCI slots 1 and 2, system board integrated drive electronics (IDE) or SCSI devices, and then PCI slots 3 through 5. Note: To change the boot sequence for PCI devices, start the Configuration/Setup Utility program, select Start Options from the main menu, select Startup Sequence; then, select Second device (SCSI) to designate the adapter boot sequence. See "Chapter 4. Configuring your computer" on page 27 for details on using the Configuration/Setup Utility program. v For a list of supported options for your computer, refer to http://www.ibm.com/pc/support on the World Wide Web. Installing an adapter Complete the following steps to install an adapter. Expansion slot cover Adapter retaining bracket Adapter Adapter support bracket Attention: When you handle ESD-sensitive devices, take precautions to avoid damage from static electricity. For details on handling these devices, see "Handling static-sensitive devices" on page 38. 1. Review the safety precautions listed in "Safety information" on page 39. 2. Remove any media (diskettes, CDs, or tapes) from the drives and shut down your operating system. 3. Turn off the computer and attached devices and disconnect all external cables and power cords; then, remove the side cover. For more information about removing the side cover, see "Removing the side cover" on page 45. 4. Determine which PCI expansion slot you will use for the adapter. 48 IBM® IntelliStation® E Pro: User's Guide IntelliStation E Pro Types 6836, 6846