Lenovo ThinkCentre A62 Hardware Maintenance Manual - Page 105
User Guide, This provides information on how to remove and replace the power supply.
View all Lenovo ThinkCentre A62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
2. Locate the battery. See "Locating parts on the system board" on page 95. 3. Remove the old battery. 4. Install the new battery. 5. Replace the computer cover, and connect the cables Note: When the computer is turned on for the first time after battery replacement, an error message might be displayed. This is normal after replacing the battery. 6. Turn on the computer and all attached devices. 7. Use the Setup Utility program to set the date and time and any passwords. See "Using the Setup Utility" in the User Guide Replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:http://www.lenovo.com/support This section provides information on how to remove and replace the power supply. To remove or replace the power supply: 1. Remove the cover. See "Removing the cover" on page 94. 2. Remove the drive bay assembly. See "Accessing system board components and drives" on page 96. 3. Disconnect all power supply cables from the system board. See "Locating parts on the system board" on page 95. Chapter 9 Replacing FRUs (Types 7057, 7062, 7092, 9342, 9344, 9354, 9426, 9486, 9624, 9707, 9787, 9804, 9945) 99