Lenovo ThinkCentre A62 Hardware Maintenance Manual - Page 50

Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See "Running tests" on page 35 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded FRU/Action No action 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Run Setup 2. Flash the system. See "Flash update procedures" on page 467 3. System board 1. Reboot the system 2. Flash the system. See "Flash update procedures" on page 467 3. Run memory test 4. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board 1. Flash the system. See "Flash update procedures" on page 467 2. PCI adapter card 3. System board 1. Flash the system. See "Flash update procedures" on page 467 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 44 ThinkCentre Hardware Maintenance Manual