Lenovo ThinkCentre A62 Hardware Maintenance Manual - Page 81
Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that
View all Lenovo ThinkCentre A62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
11. Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. 12. Remove the retention module from the rear of the failing system board and install it in the same position on the new system board. 13. To release the microprocessor 2 from the system board socket, lift the small handle 1 . Important: Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. 14. Lift the microprocessor straight up and out of the socket. Chapter 8 Replacing FRUs (Types 7061, 7090, 9353, 9421, 9485, 9623, 9625, 9705, 9786, 9795, 9935, 9946, 9953) 75
11.Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the
thermal grease does not come in contact with anything.
12.Remove the retention module from the rear of the failing system board and install it in the same position
on the new system board.
13.To release the microprocessor
2
from the system board socket, lift the small handle
1
.
Important:
Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom.
14.Lift the microprocessor straight up and out of the socket.
Chapter 8 Replacing FRUs (Types 7061, 7090, 9353, 9421, 9485, 9623, 9625, 9705, 9786, 9795, 9935, 9946, 9953)
75