Lenovo ThinkCentre M55 User Manual - Page 19
Setting, computer - serial
View all Lenovo ThinkCentre M55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 2. Setting up your computer Before you begin, make sure you set up your computer in the best possible work area that suits your needs and the kind of work you do. For more information, refer to Chapter 1, "Arranging your workspace," on page 1. Note: Read "Important safety information" on page v before you set up your computer. The precautions and guidelines will help you work safely. Connecting your computer Use the following information when connecting your computer. Look for the small connector icons on the back of your computer. If your computer cables and connector panel have color-coded connectors, match the color of the cable end with the color of the connector. For example, match a blue cable end with a blue connector or a red cable end with a red connector. Note: Depending on your model type, your computer might not have all of the connectors that are described in this section. 1. Check the position of the voltage-selection switch on the rear of the computer. Use a ballpoint pen to slide the switch, if necessary. v If the voltage supply range is 100-127 V ac, set the switch to 115 V. v If the voltage supply range is 200-240 V ac, set the switch to 230 V. 2. Connect the Universal Serial Bus (USB) keyboard cable to a USB connector. 115 © Lenovo 2005, 2006. Portions © IBM Corp. 2005. 3