Lenovo ThinkCentre M58p Hardware Maintenance Manual - Page 57

Diagnostic Error Code 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure 001-025-XXX System Checksum Value error 001-026-XXX System FLASH data error FRU/Action 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 43 2. Flash the system and retest. See "Updating (flashing) BIOS from a disc" on page 560 3. Go to "Undetermined problems" on page 69 1. Go to "Undetermined problems" on page 69 2. Flash the system and re-test 3. Replace component under function test 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board No action System board System board System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 560 2. System board Chapter 7. Symptom-to-FRU index 49