Lenovo ThinkPad 365E-ED ThinkPad 365, SelectaDock I - Hardware Maintenance Man - Page 133

Error Log Diagnostic errors are printed on the printer that is attached to the parallel port when the error is detected. The error is also logged in the system memory. Do the following to display the errors: 1. End the test, if it is running. 2. Press Ctrl+A to select the advanced diagnostic mode. 3. Press Ctrl+E. 4. The error log appears. 5. To exit the screen, select the cancel icon or press Esc. The error log is not saved when the system is powered-off. Diagnostic Error Codes If an error is detected, the following appears: Large X on the left side of the device icon. Device ID (three digit) Error code (two digit) FRU code (four digit) Start Restart X SystemBoard Memory Display 1 HDD FDD-1 PCMCIA Parallel 2 Serial DSP CDROM Infrared Audio FDD-2 Exit The device ID and error code are used to indicate the detail portion of the FRU which caused the error. If replacing a FRU does not correct the problem, see the device ID or error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed. ThinkPad 365X, 365XD (2625) 121