Lenovo ThinkPad 365E-ED ThinkPad 365, SelectaDock I - Hardware Maintenance Man - Page 210
Suspend Timer, Resume The LCD is opened.
View all Lenovo ThinkPad 365E-ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
The specified time has elapsed from the last operation with the keyboard, mouse, hard disk drive, parallel connector, or diskette drive; or the AC Adapter is plugged in. The time is specified by Suspend Timer in the ThinkPad Features program. The battery condition is low. The battery power indicator blinks orange. Either the PS2 OFF or PS2 SUSpend command is set in the ThinkPad Features program. Events that cause the computer to exit or resume suspend mode: (Resume) The LCD is opened. (Resume) The real time clock alarm is signaled. (Resume) The ring indicator (RI) is signaled by a serial or PCMCIA device. (Resume) The Fn key is pressed. (Exit) Timer conditions are satisfied for entering hibernation mode. Hibernation Mode: When in hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The system is powered-off. Notes: The computer cannot enter hibernation mode when the computer is powered with ac power and a communication PC card is used. Events that cause the computer to enter hibernation mode: Hibernation mode is requested by the Fn key (Fn+F12). Timer conditions are satisfied in suspend mode. A critical low battery condition occurs. The PS2 HIBernation command is set in the ThinkPad Features program. Event that causes the computer to exit hibernation mode. The power-on switch is operated. When power is turned on, the hibernation history in the boot record on the hard disk is recognized and system status is restored from the hard disk to resume operation. 198 IBM Mobile Systems - ThinkPad HMM Volume 3