Lenovo ThinkPad 365E-ED ThinkPad 365, SelectaDock I - Hardware Maintenance Man - Page 174
System Board / PCMCIA Slot
View all Lenovo ThinkPad 365E-ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
1130 System Board / PCMCIA Slot Assembly Battery Pack (1020) Insulator Sheet (1025) Diskette Drive / CD-ROM Drive (1040) Hard Disk Drive (1050) Top Cover (1060) Keyboard Unit (1070) LCD Assembly (1080) LCD Panel (1085) Indicator Card (1090) Volume Switch / Speaker (1100) Keyboard Card (1110) CPU Card (1120) Be Careful Connect the CPU card using the procedures exactly as shown in the figures. Make sure that the two CPU card connectors are connected properly. If these connectors are not connected, you cannot power on the computer. Do not apply any extra force to the shaded area of the CPU card when connecting. Notes 1. The system unit serial number must be restored when the system board is replaced. To restore the system unit serial number, select the option "Set system identification" on the maintenance diskette. The EEPROM on the system board contains the vital product data (VPD); that is, the system unit serial number, system board system number, and other computer-unique data. 2. Do not power off the computer when restoring the VPD. The system unit serial number label is attached to the base cover. 3. Before removing and replacing the system board, make sure that the PCMCIA cards are removed and the eject levers are not sticking out. 4. Do not pull the PCMCIA slot assembly while removing the system board. 5. When handling the PCMCIA slot assembly, be careful not to disassemble any part of it. The slot assembly is not solidly fixed when it is removed from the system board or the FRU. 162 IBM Mobile Systems - ThinkPad HMM Volume 3