Lenovo ThinkPad 365E-ED ThinkPad 365, SelectaDock I - Hardware Maintenance Man - Page 68

Running All Selected Modules To run all selected test modules: 1. Use the down arrow key (↓) to move the cursor to the last choice, Run All Selected Modules. 2. Press Enter. Note: A "DIAMOND" appears next to your selection. Changing Selected Tests in Test Groups To change selected tests in a Test Group: 1. In the Module Tests Menu, use the up and down arrow keys (↑ and ↓) to move the cursor to your selection. 2. Scroll to the test you want to select or deselect. 3. Press the spacebar at the highlighted test to toggle between select (indicated by a "DIAMOND") and deselect. Note: Pressing the first letter of a test does not activate the test, unlike menu operation. 4. Press Enter. Running an Individual Test To run an individual test: 1. Use the up and down arrow keys (↑ and ↓) to move to the highlighted bar to the test you want to run. 2. Press Enter to run the test. Note: The results of the test appear in the lower-right-hand Test Log window. Also, if you enabled Test Logging, the results are recorded in the Test Log. 3. When the test completes, press Esc to return to the Test Group Menu. Stopping the Tests To stop running a specific test or stop testing after you have started a test, press Esc while the test is running. The test pauses at the first possible opportunity, and the Skip/Abort Test Menu appears with the following options: Option Continue Skip to next test Skip to next group Abort all tests Action The test program begins testing where it left off. The test program skips the current test, but remaining tests for the selected Module Tests continue. The test program skips the remaining tests in the current test group. The test program stops and returns to the previous menu. 56 IBM Mobile Systems - ThinkPad HMM Volume 3