Lenovo ThinkPad Edge 11 Hardware Maintenance Manual - Page 46
Numeric error codes, System Security-Invalid Remote Change requested. - keyboard replacement
View all Lenovo ThinkPad Edge 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Numeric error codes Table 2. Numeric error codes Symptom or error (beeps, if any) FRU or action, in sequence 0187 System board. EAIA data access error-The access to EEPROM is failed. (two short beeps) 0189 Invalid RFID configuration information area-The EEPROM checksum is not correct. (two short beeps) System board. 0190 Critical low-battery error (two short beeps) 1. Charge the battery pack. 2. Battery pack. 0191 System Security-Invalid Remote Change requested. 1. Run BIOS Setup Utility, and then save current setting by pressing F10. 2. System board. 0210 Stuck Key (two short beeps) Change keyboard, and restart the computer. 0211 Keyboard error (two short beeps) Run interactive tests of the keyboard and the auxiliary input device. 0230 Shadow RAM error-Shadow RAM fails at offset nnnn. (two short beeps) System board. 0231 System RAM error-System RAM fails at offset nnnn. (two short beeps) 1. DIMM. 2. System board. 0232 Extended RAM error- Extended RAM fails at offset nnnn. (two short beeps) 1. DIMM. 2. System board. 0250 System battery error-System battery is dead. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0251 System CMOS checksum bad-Default configuration used. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0254 System NV7 Volume checksum bad-Default configuration used (two short beeps) Turn off the computer and discharge CMOS. Then restart the computer. 0260 System timer error. (two short beeps) 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 3. System board. 40 Hardware Maintenance Manual