Lenovo ThinkPad Edge 11 Hardware Maintenance Manual - Page 83
CRT board assembly (with cable), For access, remove these FRUs in order
View all Lenovo ThinkPad Edge 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Table 22. Removal steps of LCD unit When installing: • Make sure that you route the cables firmly as shown in this figure. • When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. 3 3 33 Step 3 Screw (quantity) M2.5 × 4 mm, wafer-head, nylon-coated (4) Color Silver Torque 0.181 Nm (1.85 kgfcm) 4 4 1140 CRT board assembly (with cable) For access, remove these FRUs in order: • "1010 Battery pack" on page 54 Chapter 8. Removing and replacing a FRU 77
Table 22. Removal steps of LCD unit
When installing:
•
Make sure that you route the cables firmly as shown in this figure.
•
When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables
to be damaged by the cable guides, or a wire to be broken.
3
3
3
3
Step
Screw (quantity)
Color
Torque
3
M2.5 × 4 mm, wafer-head, nylon-coated (4)
Silver
0.181 Nm
(1.85 kgfcm)
1140 CRT board assembly (with cable)
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 54
Chapter 8
.
Removing and replacing a FRU
77