Lenovo ThinkPad Edge 11 Hardware Maintenance Manual - Page 85
If the Windows Certificate of Authentication label COA, Applying labels to the base cover
View all Lenovo ThinkPad Edge 11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Table 24. Removal steps of DC-in cable and base cover assembly 1 2 3 Applying labels to the base cover If the Windows Certificate of Authentication label (COA) 1 is attached to a part that is replaced, return the old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were. The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: 2 SIM information label under door 3 Information label under door 5 Certified label under battery Following labels need to be peeled off from the old base cover, and need to be put on the new base cover. 4 Ethernet label For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figure: Chapter 8. Removing and replacing a FRU 79