Lexmark 13P0200 Setup Guide
Lexmark 13P0200 - C 750fn Color Laser Printer Manual
 |
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 13P0200 manual content summary:
- Lexmark 13P0200 | Setup Guide - Page 1
Lexmark C750 Setup Guide August 2001 www.lexmark.com - Lexmark 13P0200 | Setup Guide - Page 2
designation of a set of printer commands (language) and functions included in its software products. This printer is intended to be instructions, to a professional service person. • This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark - Lexmark 13P0200 | Setup Guide - Page 3
4 Installing a 500-sheet drawer 5 Installing a duplex unit 7 Positioning the printer 8 Installing an output expander 10 Installing a 5-bin mailbox 12 Step 3: Set up the print supplies 15 Setting up the print cartridges 15 Attaching an adhesive operator panel overlay 21 Step 4: Install memory - Lexmark 13P0200 | Setup Guide - Page 4
page 42 Printing a menu settings page 43 Step 8: Configure for TCP/IP 44 Setting the printer IP address 44 Verifying the IP settings 45 Configuring for Pull Printing 45 Step 9: Install printer drivers 46 Network printing 46 Local printing 49 Step 10: Distribute information to users 51 - Lexmark 13P0200 | Setup Guide - Page 5
5-bin mailbox (see page 12) or Output expander (see page 10) Printer (see page 8) Duplex unit (see page 7) 500-sheet drawer (see page 5) 2000-sheet drawer (see page 4) Your printer is available in four models: • Lexmark C750, with 1200 dots per inch (dpi) resolution, 64MB of standard memory, one - Lexmark 13P0200 | Setup Guide - Page 6
CD shipped with your printer, it may also contain MarkVision™ Professional, other printer utilities, worldwide customer support phone numbers, screen fonts, and additional documentation. Lexmark Web site Visit our Web site at www.lexmark.com for updated printer drivers, utilities, and other - Lexmark 13P0200 | Setup Guide - Page 7
. 137 cm (54 in.) 51 cm (20 in.) 30 cm (12 in.) 51 cm (20 in.) 1 Select a location for your Lexmark™ C750 printer: - Leave enough room to open the printer trays, covers, and doors; access options; and allow for proper ventilation. - Provide the proper environment: -- A firm, level surface -- Away - Lexmark 13P0200 | Setup Guide - Page 8
- Power cord - Four print cartridges (preinstalled) - Setup Guide with a Lexmark C750 Publications CD - Quick Reference card, Clearing Jams card, and printer pocket - Drivers CD If any items are missing or damaged, refer to the publications CD for the designated Lexmark support phone number for your - Lexmark 13P0200 | Setup Guide - Page 9
Note: Be sure to set up the items in the order listed in the table. Use the following table to locate the instructions you need to set up your printer and any paper handling options you may have purchased. Topic Installing a 2000-sheet drawer Installing a 500-sheet drawer Installing a duplex unit - Lexmark 13P0200 | Setup Guide - Page 10
Installing a Your printer supports one optional 2000-sheet drawer 2000-sheet drawer. sheet drawer and remove any packing material. 2 Place the drawer in the location you have chosen for your printer. 3 If you are installing a 500-sheet drawer on top of the 2000-sheet drawer, attach stabilizing - Lexmark 13P0200 | Setup Guide - Page 11
" on page 8. Leveling feet Note: You will install the power cord for the 2000-sheet drawer later. Installing a 500-sheet drawer Your printer supports up to three additional 500-sheet drawers. However, if you install a 2000-sheet drawer, you can only add one additional 500-sheet drawer. Warning - Lexmark 13P0200 | Setup Guide - Page 12
2 Place the drawer in the location you have chosen for your printer or install it on another drawer: a Align the holes in the 500-sheet 500-sheet drawer, or continue with "Installing a duplex unit" on page 7 or "Positioning the printer" on page 8. 6 Set up the printer and paper handling options - Lexmark 13P0200 | Setup Guide - Page 13
Installing a duplex unit Your printer supports an optional duplex unit that lets you print on both unit and remove any packing material. 2 Place the duplex unit in the location you have chosen for your printer or install it on a 500-sheet drawer: a Align the positioning posts on the drawer with the - Lexmark 13P0200 | Setup Guide - Page 14
up any optional drawers or a duplex unit, you are ready to position the printer. CAUTION! The printer weighs 47.7 kg (105 lb) and requires at least two people to lift it safely. 1 Have someone help you lift the printer out of the box. Use the handholds on the front and rear of the - Lexmark 13P0200 | Setup Guide - Page 15
in the location you have chosen. If you are installing the printer on an optional drawer or a duplex unit, align the positioning posts on the option with the holes in the printer. Make sure the printer is seated securely on the option. 3 Remove any tape or packing material from the outside of - Lexmark 13P0200 | Setup Guide - Page 16
Installing an output expander Your printer supports an optional output expander that lets you tabletops or fabrics. 1 Unpack the output expander and remove any packing material. 2 Remove the printer top cover. Warning! The output expander tray is designed to hold the weight of print material - Lexmark 13P0200 | Setup Guide - Page 17
3 Align the mounting brackets on the bottom of the output expander with the slots in the top of the printer. 4 Lower the output expander into place. 5 Attach the printer top cover to the output expander. Set up the printer and paper handling options 11 - Lexmark 13P0200 | Setup Guide - Page 18
output expander paper bail to the top cover. 7 Go to "Step 3: Set up the print supplies" on page 15. Installing a 5-bin mailbox Your printer supports a 5-bin mailbox that lets you collate and stack up to 500 sheets of paper. Note: After you unpack the mailbox, install it immediately. Otherwise - Lexmark 13P0200 | Setup Guide - Page 19
as a shelf; excess weight may damage it. 3 Align the mounting brackets on the bottom of the mailbox with the slots in the top of the printer. 4 Lower the mailbox into place. Set up the - Lexmark 13P0200 | Setup Guide - Page 20
5 Attach the printer top cover to the mailbox. 6 Attach the mailbox paper bail to the top cover. 14 Set up the printer and paper handling options - Lexmark 13P0200 | Setup Guide - Page 21
describes how to prepare the print cartridges and remove the packing materials inside the printer. To avoid damage, do not turn on the printer until you have completed this step and removed all packing materials. Setting up the print cartridges 1 Open the printer front cover. Set up the print - Lexmark 13P0200 | Setup Guide - Page 22
Handhold 2 Remove the packing material on top of the cartridges. 3 Remove the print cartridges. For each cartridge: a Pull up slightly on the handhold. b Pull the cartridge straight out and use the handle to lift it off the guides. c Set the cartridge on a hard, flat, clean surface in the upright - Lexmark 13P0200 | Setup Guide - Page 23
: a Grasp the material located on the right side on the inside of the machine. b Gently but firmly pull the material up and out of the printer. Make sure you also remove the packing material covering the top of the transfer belt. Warning! Do not touch the image transfer unit belt with - Lexmark 13P0200 | Setup Guide - Page 24
5 Open the front access door and pull the plastic shim out of the printer. 6 Reinstall the print cartridges. For each cartridge: a Shake the cartridge in all directions to distribute the toner. b Turn the cartridge over so that the handle is on the bottom. 18 Set up the print supplies - Lexmark 13P0200 | Setup Guide - Page 25
! Do not touch the photoconductor drum on the bottom of the print cartridge. e Holding the cartridge by the handle, rest the spokes on the cartridge on top of the guides inside the printer. Be sure to match the cartridge color with the colored label in the printer. Set up the print supplies 19 - Lexmark 13P0200 | Setup Guide - Page 26
f Slide the cartridge in as far as it will go. The cartridge lowers into place. 7 Close the front cover. Warning! If the front cover does not close completely, reopen the cover and press in firmly on the cartridges to make sure they are fully seated. 20 Set up the print supplies - Lexmark 13P0200 | Setup Guide - Page 27
translated button names: 1 Locate the adhesive overlay packaged with your printer. 2 Peel the protective backing off the overlay. 3 Align protective covering away from the overlay. Refer to the publications CD for instructions on changing the language of the text displayed on the operator panel. - Lexmark 13P0200 | Setup Guide - Page 28
capacity and connectivity by adding optional cards or hard disk. Removing the system board access cover 1 Locate the access cover on the back of the printer. 2 Loosen the four screws at the top of the access cover, but do not remove the screws completely. 3 Remove the four screws at the bottom - Lexmark 13P0200 | Setup Guide - Page 29
Hard disk connector Option card connector Firmware card connector Memory and flash memory card connectors 6 Use the following table to locate the instructions you need. To install a... Memory card Firmware card Hard disk Option card Go to page... 24 25 26 28 Install memory and option cards 23 - Lexmark 13P0200 | Setup Guide - Page 30
a memory card Follow the instructions in this section to install either a printer memory card or a flash memory card. Memory cards must have 168-pin connectors. Note: Memory options designed for other Lexmark printers may not work with your printer. Warning! Printer memory and flash memory cards - Lexmark 13P0200 | Setup Guide - Page 31
a Follow the instructions in this section to firmware card install a firmware card. Note: Firmware cards designed for other Lexmark printers may not work with your printer. Warning! Firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch - Lexmark 13P0200 | Setup Guide - Page 32
a hard disk Follow the instructions in this section to install an optional hard disk. You need a small Phillips screwdriver to attach the hard disk to the mounting plate. Warning! Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk - Lexmark 13P0200 | Setup Guide - Page 33
7 Press the ribbon cable connector into the connector on the system board. 8 Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. The hard disk snaps into place. Install memory and option cards 27 - Lexmark 13P0200 | Setup Guide - Page 34
printer has one expansion card slot that supports a number of option cards. The following table describes their function. Card Function MarkNet internal print server Adds an Ethernet or Token-Ring port so you can connect your printer Lexmark C750n, Lexmark C750in, and Lexmark C750dn printers - Lexmark 13P0200 | Setup Guide - Page 35
Warning! Option cards are easily damaged by static electricity. Touch something metal on the printer before you touch an option card. 3 Unpack the option card. Save the packing materials. 4 Align the connector on the option card with the connector on - Lexmark 13P0200 | Setup Guide - Page 36
must replace the system board access cover. 1 Align the slots at the top of the access cover with the screws near the top of the printer. 2 Slide the cover up under the top cover lip as far as it will go, and then tighten the screws at the top of the - Lexmark 13P0200 | Setup Guide - Page 37
Step 5: Load paper The following table lists page numbers where you can find loading instructions for the standard and optional trays, as well as for the multipurpose feeder. Source Paper sizes supported Paper types supported Capacity Go to page... 500-sheet trays Letter, A4, A5, Legal, Paper, - Lexmark 13P0200 | Setup Guide - Page 38
Loading the 500-sheet trays Follow these instructions to load any of the 500-sheet trays. 1 Remove the tray. 32 Load paper 2 Squeeze the front guide lever and slide the guide to the front of the tray. 3 Squeeze the side guide lever and slide the guide to the correct position for the size paper - Lexmark 13P0200 | Setup Guide - Page 39
Maximum height guide 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. side down. Do not load bent or wrinkled paper. Note: Do not exceed the maximum stack height indicated on the front guide. Overfilling the tray may cause jams. Load paper 33 - Lexmark 13P0200 | Setup Guide - Page 40
6 Squeeze the front guide lever and slide the guide until it lightly touches the stack of paper. 7 Reinstall the tray. Make sure the tray is pushed completely into the printer. Loading the 2000-sheet tray Follow these instructions to load a 2000-sheet tray. Do not load any print media other than - Lexmark 13P0200 | Setup Guide - Page 41
2 Squeeze the side guide lever, lift the guide, and place it into the appropriate slot for the size paper you are loading. 3 Squeeze the two front guide levers and slide the guide to the correct position for the size paper you are loading. Load paper 35 - Lexmark 13P0200 | Setup Guide - Page 42
4 Slide the bottom support toward the front of the tray until it touches the front guide. 5 Flex the sheets back and forth to loosen them, tray. Make sure the tray is pushed completely into the printer. Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams. 36 Load paper - Lexmark 13P0200 | Setup Guide - Page 43
you to load the appropriate print media before it prints. Follow these instructions to load the multipurpose feeder. 1 Open the multipurpose feeder. 2 Squeeze the paper guide lever and slide the guide all the way toward the front of the printer. 3 Flex the sheets back and forth to loosen them, and - Lexmark 13P0200 | Setup Guide - Page 44
will go. Do not force the print media. Note: Do not exceed the maximum stack height. Overfilling the feeder may cause jams. 6 Squeeze the paper guide lever and slide the guide until it lightly touches the side of the stack. 38 Load paper - Lexmark 13P0200 | Setup Guide - Page 45
network or locally (directly to a computer). Network printing You can attach your printer to a network using standard network cables. A 10BaseT/100BaseTX Fast Ethernet port is standard on Lexmark C750n, Lexmark C750in, and Lexmark C750dn models. You can add a Token-Ring or 10Base2 Ethernet port to - Lexmark 13P0200 | Setup Guide - Page 46
USB connections. Some UNIX, Linux, and Macintosh computers also support USB connections. Refer to your computer documentation to see if your system supports USB. • A USB port is standard on all Lexmark C750 printer models. We recommend Lexmark USB cable part number 12A2405 (2 m). • A parallel port - Lexmark 13P0200 | Setup Guide - Page 47
the shipping paper from the left access door. Hold down the lever and pull the paper out. 2 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet. If you installed an optional 2000-sheet drawer, plug the - Lexmark 13P0200 | Setup Guide - Page 48
message other than Setup Required or Ready, refer to the publications CD for instructions on clearing the message. Click Printing, and then click Understanding printer messages. 5 If you attached your printer to a network, continue with "Printing a network setup page." Otherwise, go on to "Printing - Lexmark 13P0200 | Setup Guide - Page 49
network cable may be malfunctioning. Consult your network support person, and then print another network setup page Printer Information." 5 Verify that the paper trays are configured for the sizes and types of paper you loaded. What do I do next? Task Configure for TCP/IP Install printer drivers - Lexmark 13P0200 | Setup Guide - Page 50
: You can find instructions for other methods of setting the IP address in the online documentation on the drivers CD that shipped with your printer. Launch the CD, click View Documentation, and then Network Printer Install. If your network is not using DHCP, you must manually assign an IP address - Lexmark 13P0200 | Setup Guide - Page 51
you should receive a reply. Configuring for Pull Printing If your printer has an optional ImageQuick firmware card installed, it can be configured for Pull Printing once an IP address has been assigned. For detailed configuration instructions, refer to the CD that shipped with the ImageQuick card - Lexmark 13P0200 | Setup Guide - Page 52
49 50 50 Network printing The following instructions explain how to install printer drivers on printers attached to a network. Windows In Windows network environments, Lexmark printers can be configured for direct printing or for shared printing. Supported network printer ports • Microsoft IP port - Lexmark 13P0200 | Setup Guide - Page 53
Supported printer drivers Note: Using the Lexmark C750 custom printer driver and a Lexmark network port provides enhanced functionality, such as printer status alerts. • Windows system printer driver • Lexmark C750 custom printer driver System drivers are built into Windows operating systems. - Lexmark 13P0200 | Setup Guide - Page 54
on the Lexmark Web site at www.lexmark.com. Lexmark provides a printer driver package for each supported UNIX and Linux platform. The package contains all the necessary drivers and PPDs. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX - Lexmark 13P0200 | Setup Guide - Page 55
your Windows software. Installation instructions Read the detailed online instructions on the drivers CD. Click View Documentation and look for information about local printer installation. Detailed instructions are provided for parallel and USB connections. Supported connections Parallel or USB - Lexmark 13P0200 | Setup Guide - Page 56
Solaris and Red Hat. Lexmark provides a printer driver package for each supported UNIX and Linux platform. The package contains all the necessary drivers and PPDs. The User's Guide in each package gives detailed instructions for installing and using Lexmark printers in UNIX and Linux environments - Lexmark 13P0200 | Setup Guide - Page 57
Guide. The type of helpful information provided on the Lexmark C750 Publications CD includes: • Tips for successful printing • Ways to improve print quality • Information about using the printer operator panel • Instructions for replacing a print cartridge • Solutions to common printing problems - Lexmark 13P0200 | Setup Guide - Page 58
the information on the publications CD and store it near the printer for easy access. For printing instructions, launch the CD and then click Navigation. Storing quick reference cards In addition to the Lexmark C750 Publications CD, your printer shipped with one or more quick reference cards. We - Lexmark 13P0200 | Setup Guide - Page 59
refer to the country-specific warranty information that came with your printer. Lexmark C750 This Statement of Limited Warranty applies to this product if it proof of original purchase and this statement to that user. Warranty service The warranty period is 12 months and starts on the date of - Lexmark 13P0200 | Setup Guide - Page 60
further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-800-LEXMARK (1-800-539-6275), or on the World Wide Web at http://www.lexmark.com. Free remote technical support is provided for this product throughout its warranty - Lexmark 13P0200 | Setup Guide - Page 61
This is a placeholder for the inside back cover. - Lexmark 13P0200 | Setup Guide - Page 62
P/N 10B2601 E.C. 2B0151 Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2001 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 www.lexmark.com
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
www.lexmark.com
Setup Guide
August 2001
Lexmark C750