Lexmark 13P0200 Setup Guide - Page 33
Install memory and option cards, snaps, mounting plate into the holes
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7 Press the ribbon cable connector into the connector on the system board. 8 Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. The hard disk snaps into place. Install memory and option cards 27
27
Install memory and option cards
7
Press the ribbon cable connector
into the connector on the system
board.
8
Flip the hard disk over, and then
press the three posts on the
mounting plate into the holes on
the system board. The hard disk
snaps
into place.