Lexmark 13P0200 Setup Guide - Page 28

Step4: Install memory and option cards, Removing the system board access cover

Get Lexmark 13P0200 - C 750fn Color Laser Printer PDF manuals and user guides
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Step 4: Install memory and option cards CAUTION! If you are installing memory or option cards sometime after setting up the printer, turn the printer off and unplug the power cord and any other cables before continuing. You can customize your printer memory capacity and connectivity by adding optional cards or hard disk. Removing the system board access cover 1 Locate the access cover on the back of the printer. 2 Loosen the four screws at the top of the access cover, but do not remove the screws completely. 3 Remove the four screws at the bottom of the cover. 4 Slide the cover down to remove it. 5 Use the illustration on page 23 to locate the connector for the card you want to install. 22 Install memory and option cards

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
22
Install memory and option cards
Step 4: Install memory and
option cards
CAUTION!
If you are installing memory
or option cards sometime after setting up
the printer, turn the printer off and unplug
the power cord and any other cables
before continuing.
You can customize your printer memory
capacity and connectivity by adding
optional cards or hard disk.
Removing the system
board access cover
1
Locate the access cover on the
back of the printer.
2
Loosen the four screws at the top
of the access cover, but do not
remove the screws completely.
3
Remove the four screws at the
bottom of the cover.
4
Slide the cover down to remove it.
5
Use the illustration on page 23 to
locate the connector for the card
you want to install.