Lexmark 13P0200 Setup Guide - Page 30
Installing a memorycard
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing a memory card Follow the instructions in this section to install either a printer memory card or a flash memory card. Memory cards must have 168-pin connectors. Note: Memory options designed for other Lexmark printers may not work with your printer. Warning! Printer memory and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a memory card. Connection points Notch Latch Notch The system board has three connectors for optional memory cards. You can install any combination of printer memory and flash memory cards in the connectors. However, the printer only recognizes one flash memory card at a time. 1 Remove the system board access cover (see page 22). 2 Unpack the memory card. Avoid touching the connection points along the edge of the card. Save the packaging. 3 Push open the latches on both ends of the memory connector you want to use. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. 6 Make sure each latch fits over the notch on the end of the card. 24 Install memory and option cards