Lexmark 13P0200 Setup Guide - Page 32

Installing a hard disk

Get Lexmark 13P0200 - C 750fn Color Laser Printer PDF manuals and user guides
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Installing a hard disk Follow the instructions in this section to install an optional hard disk. You need a small Phillips screwdriver to attach the hard disk to the mounting plate. Warning! Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. Hard disk Ribbon cable Mounting plate If an option card has been installed, you may need to remove it before installing the hard disk. 1 Remove the system board access cover (see page 22). 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. 3 Align the ribbon cable connector with the connector pins on the hard disk. 4 Attach the ribbon cable to the hard disk. 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. 26 Install memory and option cards

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
26
Install memory and option cards
Installing a hard disk
Follow the instructions in this section to
install an optional hard disk. You need a
small Phillips screwdriver to attach the
hard disk to the mounting plate.
Warning!
Hard disks are easily
damaged by static electricity. Touch
something metal on the printer before
you touch a disk.
If an option card has been installed, you
may need to remove it before installing
the hard disk.
1
Remove the system board access
cover (see page 22).
2
Remove the mounting plate, hard
disk, ribbon cable, and attachment
screws from the package.
3
Align the ribbon cable connector
with the connector pins on the
hard disk.
4
Attach the ribbon cable to the hard
disk.
5
Align the screw holes on the
mounting plate with the holes in
the hard disk.
6
Secure the mounting plate to the
hard disk with the screws.
Hard disk
Ribbon cable
Mounting plate