Lexmark 13P0200 Setup Guide - Page 34
Installing an optioncard, Lexmark C750in
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing an option card Your printer has one expansion card slot that supports a number of option cards. The following table describes their function. Card Function MarkNet internal print server Adds an Ethernet or Token-Ring port so you can connect your printer to a network. Install a MarkNet™ N2501e or N2401e internal print server if you received either of these cards as part of a multifunction printer upgrade. USB/Parallel 1284-C Interface Card Adds a Universal Serial Bus (USB) port or a parallel port. Coax/Twinax Adapter for SCS Adds a coaxial/twinaxial port. Tri-Port Adapter Adds LocalTalk, serial, and infrared ports. For details on setting up and using the Tri-Port Adapter, refer to the documentation that shipped with the card. Infrared Adapter Adds infrared functionality. Note: The Lexmark C750n, Lexmark C750in, and Lexmark C750dn printers ship with an Ethernet print server already installed. You need a small Phillips screwdriver to install these options. 1 Remove the system board access cover (see page 22). 2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off. Save the screw. 28 Install memory and option cards