Lexmark 13P0200 Setup Guide - Page 10
Installing a 2000sheetdrawer, Warning - support
UPC - 734646522007
View all Lexmark 13P0200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing a Your printer supports one optional 2000-sheet drawer 2000-sheet drawer. Warning! If you have an optional duplex unit, you must install one 500-sheet drawer between the duplex unit and the 2000-sheet drawer. 1 Unpack the 2000-sheet drawer and remove any packing material. 2 Place the drawer in the location you have chosen for your printer. 3 If you are installing a 500-sheet drawer on top of the 2000-sheet drawer, attach stabilizing bars to each corner. a Turn the drawer upside down. b Place the lower bracket piece over the holes on the drawer. c Insert the stabilizing bar into the opening by the bracket and then lay it flat. d Place the upper bracket piece over the bar, aligning its holes with the holes in the lower bracket piece. e Screw the bracket into place using four screws. f Repeat steps b-e for the remaining three corners. g Turn the drawer right-side up. 4 Set up the printer and paper handling options