Lexmark 16A0310 OptraImage 242/232 Setup Guide (2.5 MB) - Page 17
Step 9, Set up to send and receive, faxes
View all Lexmark 16A0310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 9: Set up to send and receive faxes FCC fax requirements See "Emission Notices" on page 30 and "Telecommunications Notices" on page 31 for more FCC information. During fax setup you must assign some basic information. The Telephone Consumer Protection Act of 1991 requires all outgoing faxes to contain the following information in a margin at the top or bottom of each transmitted page, or on the first page of the transmission: • Date and Time (date and time fax is sent) • Station Name (identification of the business, other entity, or individual sending the message) • Station Number (telephone number of the sending fax machine, business, other entity, or individual) Manual fax setup If you do not have a TCP/IP environment, you must use the OptraImage control panel to set your basic fax information. For specific instructions, refer to the online documentation on the OptraImage CD. Click View Documentation, Use OptraImage, and search for More Fax Configuration. Set up to send faxes Configuration is a task usually done by a network administrator or system support person. If you are prompted for a password during the following instructions, see your primary system support person for help. If you are changing fax modes, you must click Submit before you can access the configuration page. After the IP address is set (using any method), use your browser to set the required fax information. 1 Type the IP address of the OptraImage in the URL field of your browser (for example, http://192.168.236.24), and then press Enter. 2 Click Configuration. 3 Under the OptraImage heading, click FAX Setup. 4 Click Configuration. OptraImage Setup Guide 17