Lexmark 16A0310 OptraImage 242/232 Setup Guide (2.5 MB) - Page 29
Replacing the ADF, pad assembly
View all Lexmark 16A0310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Replacing the ADF pad assembly If you experience problems with papers double-feeding through the ADF, the pad assembly may be worn out and need to be replaced. 1 Turn off the scan unit and disconnect the power supply. 2 Open the ADF front cover . 3 Remove the old ADF detachable pad assembly by squeezing and pulling out the upper part of the pad clamp 4 Hold the upper part of the new clamp, squeeze, and place it gently in the pad holder. 5 Close the ADF. 6 Reconnect the power supply and turn the scan unit back on. OptraImage Setup Guide 29
OptraImage Setup Guide
29
Replacing the ADF
pad assembly
If you experience problems with papers double-feeding
through the ADF, the pad assembly may be worn out and
need to be replaced.
1
Turn off the scan unit and disconnect the power supply.
2
Open the ADF front cover
.
3
Remove the old ADF detachable pad assembly by
squeezing and pulling out the upper part of the pad clamp
4
Hold the upper part of the new clamp, squeeze, and place
it gently in the pad holder.
5
Close the ADF.
6
Reconnect the power supply and turn the scan unit back
on.