Lexmark 352dn Menus and Messages Guide - Page 26

Using printer menus Network Menu Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port. Standard Network Menu selection PCL SmartSwitch PS SmartSwitch NPA Mode Network Buffer MAC Binary PS Std Net Setup Purpose Values Configures the printer so it automatically On* switches to PCL emulation when a print job received through the network port requires it, regardless of the default printer language Off Printer examines data on the network interface and selects PCL emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. Configures the printer so it automatically On* switches to PostScript emulation when a print job received through the network port requires it, regardless of the default printer language Off Printer examines data on the network interface connection and selects PostScript emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. Specifies whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol Changing this menu item automatically resets the printer. Off Auto* Printer does not perform NPA processing. Printer examines the data to determine the format and then processes it appropriately. Configures the size of the network input buffer Changing the Network Buffer menu item automatically resets the printer. Auto* 3K to maximum size allowed Printer automatically calculates the Network Buffer size (recommended setting). User specifies the Network Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel and USB buffers. Configures the printer to process On Macintosh binary PostScript print jobs Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. This setting often causes Windows print jobs to fail. Off Printer filters PostScript print jobs using standard protocol. Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems. Configures an internal print server Values for this menu item are supplied by the specific print server. Select the menu item to see the available values. 26