Lexmark 352dn Menus and Messages Guide - Page 29

Understanding printer messages The printer control panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This topic provides a list of all printer messages, explains what they mean, and tells you how to clear the messages. The following table lists the messages in alphanumerical order. You can also locate a message using the index. Message Action Activating Demo Mode Wait for the message to clear. Activating Menu Changes Wait for the message to clear. Activating/Deactivating PPDS Wait for the message to clear. Busy Wait for the message to clear, or cancel the print job. Cancelling Job Wait for the message to clear. Change Cartridge Invalid Refill The printer has detected an unsupported refilled cartridge. Remove the indicated print cartridge and install a new one. Close door Close the specified door to clear the message. Deactivating Demo Mode Wait for the message to clear. Defragmenting Flash DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Disabling Menus Wait for the message to clear. Note: While the menus are disabled, you cannot change the printer settings from the control panel. Enabling Menus Wait for the message to clear. Flushing buffer Wait for the message to clear. Formatting Flash DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Invalid Engine Code Download valid engine code to the printer. Note: You can download engine code while this message is displayed. Invalid Standard Network Code The code in an internal print server is not valid. The printer cannot receive and process jobs until valid code is programmed into the internal print server. Download valid code to the internal print server. Note: You can download network code while this message is displayed. Load manual feeder with • Load the specified paper in the manual feed tray or multipurpose feeder. • To ignore the manual feed request and print on paper already installed in one of the input sources, press . Load manual feeder with If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size, it Load manual feeder with prints on whatever paper is installed in the default input source. • Cancel the current job. Load manual feeder with 29