Lexmark 352dn Menus and Messages Guide - Page 30

Understanding printer messages Message Load with Load with Load Load Maintenance Menus Disabled Network Network Card Busy Not Ready Parallel Performing Self Test Power Saver Printing Directory List Printing Font List Printing Menu Settings Printing Device Statistics Printing Quality Test Pages Prog Engine Code DO NOT POWER OFF Program Flash DO NOT POWER OFF Prog System Code DO NOT POWER OFF Ready Remove Paper Standard bin Action • Load the input source with the correct type and size media. • Cancel the current job. Replace the maintenance items and, if necessary, reset the printer maintenance counter. The printer menus are disabled. You cannot change the printer settings from the control panel. Note: You can still cancel a job. Contact your system support person. A network interface is the active communication link. An internal print server (also called an internal network adapter or INA) is being reset. Wait for the message to clear. The printer is not ready to receive or process data. Someone pressed to take the printer offline. Press to make the printer ready to receive jobs. A parallel interface is the active communication link. The printer is running the series of start-up tests it performs after it is turned on. Wait for the message to clear. • Send a job to print. • Press to warm the printer to normal operating temperature and display the Ready message. The printer is processing or printing a directory of all files stored in flash memory. Wait for the message to clear. The printer is processing or printing a list of all available fonts for the specified printer language. Wait for the message to clear. The printer is processing or printing the menu settings page. Wait for the message to clear. The printer is printing statistical information about the printer. Wait for the message to clear. The printer is formatting and printing the Print Quality Test, which consists of 4 pages. Page 1 contains a mixture of graphics and text, pages 2 and 3 contain only graphics, and page 4 is a blank page. If Duplex is turned on, then the pages are duplexed; otherwise, they are simplexed. Wait for the message to clear. The printer is programming new engine code. Wait for the message to clear and the printer to reset. Warning: Do not turn the printer off while this message is displayed. The printer is storing resources, such as fonts or macros, in flash memory. Wait for the message to clear. Warning: Do not turn the printer off while this message is displayed. The printer is programming new system code. Wait for the message to clear and the printer to reset. Warning: Do not turn the printer off while this message is displayed. Send a job to print. The standard output bin is full. 30