Lexmark 4600 T64x - Menus and Messages Guide - Page 107
Continue, Restart job, Cancel Job, Scan from Automatic Document Feeder, Scan from flatbed
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Understanding MFP messages Message Fax Memory Full If restarting job, replace originals that have not begun to exit the scanner. Insert staple cartridge Insert tray [x] Install bin Install duplex Install envelope feeder Meaning Action There is no memory to complete a fax Touch Continue to clear the message. job. Any attempted fax jobs are canceled. One or more messages that interrupted a scan job are now cleared. A situation exists where a page is not completely scanned, but not fully exited the ADF. Replace the original documents in the scanner to restart the scan job. Touch Restart job if page level recovery is active and the job is restartable. The message clears. A new scan job containing the same parameters as the previous job starts. Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears the message. Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the last successfully scanned page. Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. The staple cartridge is missing from the MFP. Install a staple cartridge to clear the message. Touch Continue to clear the message and print without using the staple feature. Occurs when the MFP detects a missing tray. x can be 1, 2, 3, 4, or 5. Insert the specified tray to clear the message. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. The MFP detects that bin [x] is missing where x is the number of the bin. This message occurs when pages are formatted when the bin is present, but before the pages are printed. Between the formatting and printing time, the optional bin is removed from the MFP. • Turn the MFP off, unplug the power cord from the wall outlet, install the specified bin, connect the power cord to a properly grounded outlet, and then restart the MFP. • Touch Cancel Job to cancel the current job. • Touch Reset Active Bin to reset the active bin for a linked set of bins. The MFP detects that the duplex unit is missing. This message occurs when pages are formatted when the duplex unit is present, but before the pages are printed. Between the formatting and printing time, the duplex unit is removed from the MFP. • Turn the MFP off, unplug the power cord from the wall outlet, install the duplex unit, connect the power cord to a properly grounded outlet, and then restart the MFP. • Touch Cancel Job to cancel the current job. The MFP detects that the optional envelope feeder is missing between the time the job processes, but before the job prints. Sometime during processing, the optional envelope feeder is removed. Install the optional envelope feeder. The message clears. Touch Cancel Job if needed. Touch Reset Active Bin to reset the active bin for a linked set of bins. Attendance messages 107