Lexmark 4600 T64x - Menus and Messages Guide - Page 27
Custom Bin Names, Universal Setup, Multi Print, Duplex Bind
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Using the MFP menus Custom Bin Names This menu item is used to define a custom name for each output bin based on a person or the type of print media assigned to exit to a specific output bin. Menu item Purpose Values and descriptions bin , where x is 1-10 based on the MFP model or the optional finisher, if one is attached. [user-defined name], such as: Company's bin Lawyer's bin Mary's bin Stephen's bin The custom output bin must be able to accept the type of print media assigned to exit to the defined bin in order for a user-defined name to be assigned. Universal Setup These menu items are used to specify the height and width of the Universal Paper Size. When the height and width for Universal Paper Size are specified, the MFP uses the Universal setting like other paper sizes, including support for duplex and n-up. For more information on n-up, see Multipage Print. Menu item Purpose Values and descriptions Units of Measure Determines the unit of measure used to enter the Universal Height and Width. Inches Millimeters Inches is the US default, and Millimeters is the international default. Portrait Width Sets the portrait width of the universal media. Note: If the value set exceeds the maximum width, the MFP uses the maximum value allowed in inches or millimeters. 3-14.17 inches in 0.01 inch increments 76-360 mm in 1 mm increments Shows either inches or millimeters from the Units of Measure setting; 8.5 inches is the US default, and 216 mm is the international default. Portrait Height Sets the portrait height of the universal media. Note: If the value set exceeds the maximum height, the MFP uses the maximum value allowed in inches or millimeters. 3-14.17 inches in 0.01 inch increments 76-360 mm in 1 mm increments Shows either inches or millimeters from the Units of Measure setting; 14 inches is the US default, and 356 mm is the international default. Feed Direction Specifies the feed direction of the Universal Paper Size. Short Edge* Long Edge Feed Direction is only shown if the Long Edge value is available. Long Edge exists if the longest edge is shorter than the maximum physical width that the tray can accommodate. See Duplex Bind on page 77 for more information about short and long edges. Paper Menu 27