Lexmark 4600 T64x - Menus and Messages Guide - Page 123
Continue, Cancel Job, Scan from Automatic Document Feeder, Scan from flatbed
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Understanding MFP messages Message Meaning Action 293 Replace all originals if restarting job. The MFP receives a scan job; however, there is no original document in the ADF. Job level recovery is active. 293 Replace jammed originals if restarting job. The MFP receives a scan job; however, there is no original document in the ADF. Page level recovery is active. Touch Continue if no scan job is active when the attendance message appears. This clears the message. Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears the message. Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the last successfully scanned page. Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job containing the same parameters as the previous job starts. 294.00 Scanner jam, remove all originals from the scanner The scanner detects a jam at the ADF Remove all original documents from the ADF to exit sensor while the scanner is idle. clear the jam. The message clears. Job level recovery is active. 294.00 Scanner jam, remove jammed originals from the scanner The scanner detects a jam at the ADF Remove all original documents from the ADF. exit sensor while the scanner is idle. The message clears. Page level recovery is active. 294.01 Scanner jam, remove all originals from the scanner The scanner detects a jam at the ADF Remove all original documents from the ADF to exit sensor while the scanner is idle. clear the jam. The message clears. Job level recovery is active. 294.01 Scanner jam, remove jammed originals from the scanner The scanner detects a jam at the ADF Remove all original documents from the ADF. exit sensor. The message clears. Page level recovery is active. 298.01 Scanner Missing - The MFP detects after powering on Cable Unplugged that the front side scanner cable is unplugged. 1 Turn the MFP off. 2 Plug the front side scanner cable into its connector. 3 Turn the MFP on. 298.02 Scanner Missing - The MFP detects after powering on Cable Unplugged that the back side scanner cable is unplugged. 1 Turn the MFP off. 2 Plug the back side scanner cable into its connector. 3 Turn the MFP on. Attendance messages 123