Lexmark 4600 T64x - Menus and Messages Guide - Page 112

Understanding MFP messages Message Scan Document Too Long Scanner ADF Cover Open Scanner locked, release lock under scanner Scanner registration successfully completed Some held jobs were not restored Unsupported USB device, please remove Unsupported USB hub, please remove 1565 Emul error, load emulation option 30.yy Invalid refill, change cartridge 31.yy Replace defective print cartridge 32.yy Replace unsupported print cartridge Meaning The scan job exceeds the maximum number of pages. The scanner automatic document feed cover is open. The scanner carriage lock is engaged. Scanner registration is successful. Action Note: The scanner finishes scanning current pages in the ADF, but data is lost when the job cancels itself after reaching the maximum number of pages. Touch Continue to clear the message. Touch Cancel Job to clear the message if the job is restartable. Touch Restart job if the job is restartable. The message clears, and a new scan job containing the same parameters as the previous job starts. The message clears when the cover is closed. Release the lock under the scanner. Touch Continue. Touch Continue to clear the message. Some held jobs are not restored; they remain on the hard disk and are inaccessible. Note: This message appears once after the MFP firmware tries to restore all the held jobs on the hard disk regardless of the number of held jobs not restored. Touch Continue to clear the message. The front USB contains a device or hub that is not recognized. Remove unrecognized hub or device to continue. A USB hub in the front USB is not recognized. Remove the unrecognized device to continue and clear the message. The download emulator contained in the firmware card does not function with the MFP firmware. Note: The MFP automatically clears the message in 30 seconds and then disables the download emulator on the firmware card. For help downloading the correct download emulator version, contact the place where you bought your printer. The MFP detects a refilled Lexmark Cartridge Return Program print cartridge. Install a new print cartridge to clear the message. The MFP detects a defective print cartridge within 10-20 seconds after the top cover is closed. Remove the defective print cartridge and install a nondefective print cartridge for printing to continue. During the 10-20 second interval before the defective print cartridge is detected, the MFP may continue to print pages; however, the pages are not reprinted once the new print cartridge is installed. The MFP detects an unsupported print cartridge within 10-20 seconds after the top cover is closed. Remove the unsupported print cartridge and install a supported print cartridge for printing to continue. During the 10-20 second interval before the unsupported print cartridge is detected, the MFP may continue to print pages; however, the pages are not reprinted once the new print cartridge is installed. Attendance messages 112