Lexmark CX517 User Guide - Page 308
Partial document or photo scans, Step 3
View all Lexmark CX517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Troubleshooting 308 Action Yes Step 3 Go to step 4. Clean the scanner glass and the ADF glass using a clean, lint‑free cloth dampened with water. Is the scanner glass clean? Step 4 Go to step 5. Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner. Is the document or photo loaded correctly? Step 5 Go to step 6. Send a print job, and then check for print quality problems. • From the General Settings menu, adjust the Eco‑Mode settings. • From the Copy menu, adjust the Darkness setting. • When the print becomes faded, replace the toner cartridge. Is the print quality satisfactory? Step 6 Check the scan settings. From the Scan screen, make sure the Content Type and Content Source settings are correct for the document being scanned. Go to step 7. Are the Content Type and Content Source settings correct for the document being scanned? Step 7 Problem solved. Increase the scan resolution settings for a higher‑quality output. Did the increased resolution produce a higher‑quality output? No See "Cleaning the scanner glass" on page 209. Place the document or photo facedown on the scanner glass in the upper left corner. See "Print quality problems" on page 275. Change the Content Type and Content Source settings to match the document being scanned. Contact customer support. Partial document or photo scans Action Yes Check the placement of the document or photo. Contact customer Make sure the document or photo is loaded facedown on the support. scanner glass in the upper left corner. Is the document or photo loaded correctly? No Load the document or photo facedown on the scanner glass in the upper left corner.