Lexmark E312L User's Guide - Page 83
If your printer lights look like, this in configuration mode, Then your printer, Factory, Default
View all Lexmark E312L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
If your printer lights look like this in configuration mode: Then your printer: Factory Default Parallel Protocol setting is set to Fastbytes, the factory default. Fastbytes When the protocol is set to Fastbytes, the printer receives information at a much faster transmission rate, provided the host computer supports Fastbytes. When the protocol is set to Standard, the printer receives information at a normal transmission rate. The Press Button light is off when Parallel Protocol is set to Standard. • Do a brief button press to change the setting (Fastbytes, Standard). • Do a double button press to scroll to the next menu item, PPDS Activated. • Do a long button press to select and save a setting for this menu. As the setting is saved, all operator panel indicator lights remain on for approximately 2 seconds. Turn off the printer to exit configuration mode. 70 Appendix B: Advanced troubleshooting